August 2011
9 posts
WatchPeggi 2 Multiplexing Board Arrives
Digital Chainsaw (AT) BlogSpot →
WatchCurrent Module Testing
WatchWall Module 01 Testing
WatchWall Module 02 Testing
Project Update 02
Step Two_
17/6/11
Survey Data_
Analysis has started to pour in from the survey monkey circulation data is slowly coming back in. When the data is received then analysis can begin and visualization of the survey data can be tested.
Rapid Prototyping_
There was a problem with the grasshopper modeling as some of the surfaces were not lofting properly then the model was given a thickness. The...
Project Update
Step One_ 14/8/2011
SURVEY DATA_
When designing intelligent architectural surfaces it is important to develop a user interface that will enable the wall to convey the relevant information to the user. So in designing an interactive wall for a large scale urban transportation system it is necessary to research on what type of information should be available to the user.
To help inform the type of...
WatchTesting of an interactive wall in grasshopper with an Arduino sensor.
5 tags
Intelligent Architectural Surfaces
This project is to create an intelligent architectural surface that is able to assist in the operation of rail networks throughout Queensland.
This is the first trial of trying to get the arduino software operating through a plug in for grasshopper named “firefly”.
The setup is geared to read the distance measured by the “Ping” ultrasonic sensor and pump those outfits...
